Fluid Bed Replacement Energy Saving and Environment Protection Heat Exchanger

Model Number: SV-#4930 Brand Name: SeHenStar Key Specifications/Special Features: Plate type bulk solids heat exchanger is conceptually a very simple piece of equipmentIt consists of an inlet hopper, one or more plate banks in parallel and a mass flow deviceProduct enters in the top,forms cone above the plates and flows between the equal flows channels in gravity flowCooler operates with the product level always maintained above the plate banksSo it operates always full of productMass flow device creates equal movement of bulk solids over the whole cross-section of the cooler cooling water flows through the platesA relatively simple level control at the top (not in our scope) generates 4- 20mA signal to control the mass flow device at the bottom in such way that what comes in at the top leaves at the bottom within maximum and minimum inlet hopper level set pointsFeatures:A. Uses up to 90% less energySV bulk solids heat exchanger are ultra-efficient, using up to 90% less energy than other technologiesIndirect plate cooling design does not require the use of air in the cooling process, which eliminates both the need for large horsepower electric drives and the associated heat lossesB. Zero emission, dust, fines or odorsIndirect plate cooling design means air is not in contact with the product during the cooling process emissions, dust, fines and odors are eliminated because air is not used to directly cooling the productC. Reduced installation costsindirect plate cooling design means air is not used in the cooling process Installed capital costs are reduced due to the elimination of costly and unnecessary air handling equipment such as large diameter air ducting, motors and fans, scrubbers, chillers and emissions controls
D. Compact and modular-adding future capacity is easyvertical configuration makes this design both compact and modular
Clever modular design means that additional heat exchanger plate banks can be stacked if increased cooling capacity is required in the future
Compact installation footprint makes this design easy to integrate in existing plants and is ideal for de-bottlenecking, revamps and capacity increases
E. Uniform final product temperaturemass flow design means the product moves with uniform velocity through the heat exchanger
This feature, combined with long residence times (typically 5-10 minutes), enables even temperature distribution as the product passes through the heat exchanger, producing remarkably stable and uniform final product temperature